BKLMQ - RTV102 SILICONE SEALANT

Product Identification

Product ID:RTV102 SILICONE SEALANT
MSDS Date:10/21/1985
FSC:8030
NIIN:00B070066
MSDS Number: BKLMQ

Responsible Party
GENERAL ELECTRIC CO. - SILICONE PRODUCTS DIV.
NONE SPECIFIED BY MANUFACTURER.
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3300

Info Phone: 518-237-3300

Cage: 01139

Contractor
GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

Ingredients

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION MAY CAUSE GASTRIC
DISTRESS. SKIN CONTACT MAY CAUSE IRRITATION. INHALATION CAUSES MILD
RESPIRATORY IRRITATION (APPLIES ONLY IN UNCURED STATE). EYE CONTACT
WITH UNCURED PRODUCT CAUSES I RRITATION. CHRONIC: RESPIRATORY
AILMENTS.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT
LEAST 15 MIN AND GET MEDICAL ATTENTION IF IRRITATION PERSISTS.
SKIN: REMOVE COMPLETELY WITH A DRY CLOTH OR PAPER TOWEL BEFORE
WASHING WITH DETE RGENT AND WATER. INHALATION: REMOVE PERSON TO
FRESH AIR. INGESTION: RINSE MOUTH WITH WATER SEVERAL TIMES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>400F,>204C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA, DRY CHEMICAL
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WIPE OR SOAK UP IN AN INERT MATERIAL AND PUT
IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH DETERGENT
AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER PROTECTIVE
EQUIPMENT AS SPECIFIED IN THE PROTECTIVE EQUIPMENT SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
AVOID CONTACT WITH SKIN AND EYES.
Other Precautions:CAUTION! WEARERS OF CONTACT LENSES MUST NOT HANDLE
LENSES UNTIL ALL SEALANT HAS BEEN CLEANED FROM FINGERTIPS; RESIDUAL
SILICONE WILL TRANSFER TO LENSES AND CAUSE SEVERE EYE IRRITATION.

Exposure Controls

Respiratory Protection:USE IN A WELL VENTILATED AREA.
Ventilation:GENERAL EXHAUST USUALLY ADEQUATE.
Protective Gloves:CLOTH GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING, DRINKING
OR SMOKING!
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Spec Gravity:1.07
Evaporation Rate & Reference:<1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID PASTE, ACETIC ACID ODOR.
Percent Volatiles by Volume:<5

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, SILICON DIOXIDE,
ACETIC ACID.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.